38
CONNECTORS & RECEPTACLES
HIGH POWER CONNECTORS PHONE: 773 792-2700
* Please visit the product pages on our website for the most up-to-date product information
HPC SERIES PANEL MOUNTS AND CORD PLUGS
HPCPR41F
HPCP41F
HPCP410RA
HPCI4F
HPCC4F
HPCC4RAF
HPC SERIES
Switchcraft recently introduced a complete line of panel mount
speaker connectors that are completely compatible with the
Neutrik ? Speakon ? 4 pole series. We are now introducing a
complete line of cable mounts as well. The complete HPC
Series offers both panel mount and cord mount connectors.
The HPC panel mounts have been updated with new
silver-plated contact materials that boost the contact ratings to
30A per UL 1977 on PC mount versions, 50A per UL 1977 on
Faston ? versions. They are still available with either 0.100"
depth flanges or 0.200" depth flanges. The 0.200" depth flange
allows for rear mounting of the HPC Series, and proper mating
of all cord plugs. The panel mount versions are available with
either 0.187" or 0.250" Faston ? terminals, and either straight or
right angle PC mount terminals. The right angle PC mount
version also has, as an option, a mounting post which allows
the connector to snap onto the PC board for wave soldering.
The HPC cord plugs are available in either straight, right
angle, or as an in-line. The in-line version mates with either the
straight or right angle cord plug, allowing the end user to extend
cable runs. All cord plugs are compatible with Speakon ? panel
mounts. The in-line mates with our HPC cord plugs, as well as
Speakon ? cord plugs. The unique feature of the HPC series
cord plugs are the “push to lock” feature, similar to the
connection of an XLR connector. The HPC cord plugs, when
mated to either HPC panel mounts or Speakon ? panel mounts
do not require a 1/4" turn to engage. Simply push the connector
in until it locks. To disengage, push forward on the latch lever
and pull the connector out. This feature eliminates the need to
remember to turn the connector to make contact. All HPC cord
plugs utilize 0.250" Faston ? terminals, which allow for easy
assembly, and make it easy to change cord plugs. To change
from a straight cord plug to an in-line cord plug, back off the
strain relief nut, twist off the handle, disconnect the Faston ?
terminals, fasten the new cord connector, twist on the handle
and the strain relief. Barbs on the handle keep the handle from
vibrating loose from the front shell.
Both HPC panel mounts and cord plugs incorporate a built-in
gasket, which allows them to meet IP 25 harsh environment
ratings, as well as IEC 529 and IEC 1010-1 safety ratings.
FEATURES AND BENEFITS
? Completely compatible with Neutrik ? Speakon ?
4 pole connectors
? 30A rating per UL 1977 on PC mount versions
? 50A rating per UL 1977 on Faston ? versions
? Right angle or straight PC board terminals on panel mounts
? Built in gasket gives all HPC connectors IP 25
environmental ratings
? All HPC Series meet IEC 529 and IEC 1010-1 safety ratings
? Cord plug versions offer “push to lock” design,
no 1/4" turn to engage
? Cord plug versions accept 10 AWG wire,
0.560" cable OD max
APPLICATIONS
? Loudspeakers
? Power audio amplifiers
SPECIFICATIONS
Materials
Housings: Thermoplastic UL 94V-O rated
Seal Rings: Thermoplastic rubber
Contacts: Silver-plated over copper alloy
ELECTRICAL
PC Terminals Current Rating: 30A per UL 1977
Faston ? Terminals Current Rating: 50A RMS w/10AWG
wire, normal ambient, per UL 1977
Voltage Rating: 1,500 AC RMS, Per Mil-Std 202 Method 301
Insulation Resistance: > 2T Ohms
Contact Resistance: 1m Ohm, 1.5mOhm after 1,000
insertion/withdrawals
MECHANICAL
Shock: Mil-Std 202, Method 213B Cond.K
Vibration: Mil-Std 202, Method 201A
Life: 1,000 insertion/withdrawals
Cable Range: 0.560” OD max
ENVIRONMENTAL
Salt Spray: Mil-Std 202, Method 101D Cond. B
Thermal Shock: Mil-Std 202, Method 107G
Temperature Limits: -55 C to +85 C
Moisture Resistance: Mil-Std 202, Method 106E
Life@Ambient Temperature: Mil-Std 202, Method 108A
Touch Proof: IEC 65 and 1010-1
Weather Tightness: IEC 529, IP 25
CORD MOUNT ORDERING INFORMATION
Part Number Description
? Panel mounts have two different Faston ? terminal sizes,
0.187" and 0.250"
? Panel mounts offered with two different flange depths,
0.100" and 0.200"
? 0.200" depth flange offers easy rear mounting
HPCC4F
HPCI4F
HPCC4RAF
Straight Cord Plug
Inline Cord Plug
Right Angle Cord Plug
DIMENSIONS ARE FOR REFERENCE ONLY
www.switchcraft.com
Inch
(mm)
? Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
相关PDF资料
HSEC8-140-01-SM-DV-A CONN EDGE CARD DUAL .8MM 80POS
HT850UPS UPS 750VA 450W 12OUT RJ11 COAX
HVD5-A20M-050-05 RES NET MULT OHM 2 RES 15-SIP
HWCHAS1310AL BOX ALUM 13X10X3" NAT/WAL
HWCHAS1710AL BOX ALUM 17X10X3" NAT/WAL
HWS100-5/ME PWRSUP IND MEDICAL 5V 100W 20A
HWS150036/HD PWR SUP IND 36V 1512/1674W
HWS600-24/HD PWR SUP IND 24V 648W 27A
相关代理商/技术参数
HPCPK324F1 功能描述:插线板 HPC Ldspkr Patchbay 24P 0.187" Faston RoHS:否 制造商:Switchcraft 产品类型:Bantam (TT) 正规化: 高度/机架数量: 深度: 端接类型: 位置/触点数量:48
HPCPK3B 功能描述:插线板 HPC Ldspkr Patchbay Blank Panel RoHS:否 制造商:Switchcraft 产品类型:Bantam (TT) 正规化: 高度/机架数量: 深度: 端接类型: 位置/触点数量:48
HPCPR410F 功能描述:扬声器连接器 HPC CONN FAST-ON TE RoHS:否 制造商:Neutrik 标准:Speakon, HPC 型式:Male 位置/触点数量:2 端接类型: 安装风格:PCB 方向:Vertical 触点电镀: 颜色: 触点材料: 电压额定值: 电流额定值:
HPCPR410F1 制造商:SWITCH 制造商全称:Switchcraft, Inc. 功能描述:HIGH POWER CONNECTORS , Panel Mounts and Cord Plugs
HPCPR410PC 功能描述:扬声器连接器 4 PIN PANEL CON RND PRINTED CIRCUIT RoHS:否 制造商:Neutrik 标准:Speakon, HPC 型式:Male 位置/触点数量:2 端接类型: 安装风格:PCB 方向:Vertical 触点电镀: 颜色: 触点材料: 电压额定值: 电流额定值:
HPCPR410RA 功能描述:扬声器连接器 HHPC CONN RIGHT ANG RoHS:否 制造商:Neutrik 标准:Speakon, HPC 型式:Male 位置/触点数量:2 端接类型: 安装风格:PCB 方向:Vertical 触点电镀: 颜色: 触点材料: 电压额定值: 电流额定值:
HPCPR410RAP 功能描述:扬声器连接器 HPC CONN RIGHT ANGLE RoHS:否 制造商:Neutrik 标准:Speakon, HPC 型式:Male 位置/触点数量:2 端接类型: 安装风格:PCB 方向:Vertical 触点电镀: 颜色: 触点材料: 电压额定值: 电流额定值:
HPCPR41F 功能描述:扬声器连接器 4 PIN PANEL CON RND .250 FASTON RoHS:否 制造商:Neutrik 标准:Speakon, HPC 型式:Male 位置/触点数量:2 端接类型: 安装风格:PCB 方向:Vertical 触点电镀: 颜色: 触点材料: 电压额定值: 电流额定值: